Frequently asked questions

Questions about Analyze and Pulse Gen.

Who builds it, what data it works with, how the analysis and machine-learning tools behave, and how Pulse Gen and analysis services fit in.

01

About Blackfish Acoustics

Who built Analyze?

Analyze was built by Josh Tabor, founder and lead developer of Blackfish Acoustics. Josh holds an Advanced Diploma in Oceans Technology and has spent the past seven years in underwater acoustics: designing transducers, building and testing prototypes, analysing acoustic data, and planning and running sea trials.

He has also designed passive acoustic monitoring programmes for marine mammal mitigation. As a certified Marine Mammal Observer (MMO) and PAM operator, he has logged hundreds of hours in both roles at sea.

Analyze started because the software available wasn’t meeting the needs of that work. Field data arrives with calibration sheets, GPS tracks, CTD casts and deadlines attached, and Analyze keeps all of it in one project so every result can be traced back to the recording that produced it.

Where is Blackfish Acoustics based?

Blackfish Acoustics is based in Nova Scotia, Canada.

Does Blackfish Acoustics also offer analysis services?

Yes. Blackfish Acoustics can analyse hydrophone recordings, PAM deployments, directional sensor data and sonar trials, and deliver documented methods, data tables, figures and the supporting acoustic evidence. See data analysis services.

02

Getting started

What is Analyze?

Analyze is a Windows desktop application for underwater acoustic analysis. It brings waveform, FFT, spectrogram playback, calibrated SPL, acoustic machine learning, reviewed auto-annotation, PAM workflows, DIFAR processing, GPS mapping, CTD context and propagation modelling into one project workspace.

Which operating system do Analyze and Pulse Gen run on?

Both run on Windows.

How much do Analyze and Pulse Gen cost?

Pricing is provided on request. Email sales@blackfishacoustics.com or use the contact form to ask about pricing and licensing.

Is there a user manual?

Yes. The Analyze user manual covers project setup, interface controls, analysis tools, modelling workflows and the methods used to interpret results. Recent changes are listed on What’s new.

How do I arrange a demonstration or ask about licensing?

Email sales@blackfishacoustics.com or use the contact form. A demonstration can be focused on your own recordings, instruments or workflow.

03

Data and compatibility

What file types can Analyze open?

Analyze works with uncompressed WAV recordings, including multichannel files. The machine-learning Sound Library also accepts labelled FLAC recordings. GPS tracks and CTD profiles can be added to a project for spatial and environmental context.

Which recorders, hydrophones and CTDs are supported?

Analyze works from standard recording and export formats rather than locking a project to one manufacturer. The supported instruments page lists the hydrophone, recorder, directional-sensor and CTD families with a known data route. A listing is not a certification: compatibility should be confirmed with a representative export.

Can Analyze estimate projector source level?

Yes. With a voltage probe on the projector terminals and the projector’s TVR curve, Analyze labels FFT peaks with estimated source SPL and plots source SPL over time. This is a modelled estimate, not a hydrophone measurement. See transmit testing.

How is hydrophone calibration handled?

Calibration and channel roles are assigned within the project, so levels can be converted to calibrated SPL. If a recording is already expressed as SPL, workflows can use those results directly without applying a hydrophone sensitivity curve a second time.

My instrument isn’t listed. Can I still use it?

Possibly. Send a representative WAV file and its calibration record and the import route can be checked.

04

Analysis workflows

Can Analyze process DIFAR and directional data?

Yes. Directional channel roles can be assigned and retained while the recording is inspected and processed, and bearing results can be displayed with imported vessel tracks and fixed project positions on the Chart workspace. See DIFAR analysis.

Can the DIFAR workflow be validated?

Yes. The DIFAR simulator generates controlled directional scenarios that can be processed through the same workflow, so estimated bearings can be compared with the known simulated truth.

Is Analyze suitable for long PAM deployments?

Yes. Recordings, measurements, detections, notes and exports are grouped beneath the project, and project workflows show which WAV files have been reviewed and which outputs still need attention. See passive acoustic monitoring.

What does the propagation modelling do?

It compares bottom types and sea states, applies focus-frequency or full-band range criteria and minimum receive levels, and can use CTD profiles, deployment depths and GPS tracks as context. It is an engineering screening model rather than a guarantee of achieved range. See propagation with CTD and GPS.

05

Machine learning

What can the machine-learning tools do?

You can build a labelled Sound Library, train complete or focused detection profiles, verify predictions on independent files, and use the active model to propose annotations on the spectrogram. See machine learning.

Does the model replace the analyst?

No. Model output is decision support. The analyst accepts, corrects or rejects every proposed annotation, and the final class is retained alongside the original model guess, confidence, source file, times and review timestamp.

Does a high confidence or similarity score prove an identification?

No. It indicates similarity to what the model has learned. Classification quality depends on representative labelled data and should be verified against independent recordings from the intended operating conditions.

Can I go back to an earlier model?

Yes. The previous trained model is archived before retraining, so an earlier version can be restored and the same held-out material rerun for comparison.

06

Pulse Gen

What is Pulse Gen?

Pulse Gen is a Windows application for calibrated underwater signal generation. It uses your projector TVR and amplifier gain curves, with their voltage limits, to generate test signals and synthetic sources, then plays them through an NI DAQ while monitoring and recording the measured voltage, current and hydrophone inputs. See Pulse Gen.

Does Pulse Gen need hardware?

Generating signals and reviewing files can be done without an attached DAQ. Playback, live acquisition and calibration need compatible NI DAQ hardware with the NI-DAQmx driver installed.

Is the requested SPL what the projector will produce?

Not necessarily. The requested level is a calibration-based estimate from the imported curves, and Pulse Gen can lower the drive when stored voltage limits are reached. Each generated file comes with notes recording the curves, settings and any limiting applied. Confirm the achieved level with a calibrated measurement channel.

Can Pulse Gen generate offshore-wind pile-driving sound?

Yes. Pile Driving Noise includes standard and heavy monopile, jacket pin-pile, soft-start and distant styles, with per-strike peak SPL, T90 RMS SPL and single-strike SEL diagnostics. The style values are simulation presets, not measurements of a particular installation. See offshore-wind pile driving.

Can Pulse Gen generate marine-mammal calls?

Yes, for 15 species, from parameter models learned from annotated recordings. They are acoustic prototypes rather than certified species emulators, and support varies widely between species. See marine-mammal calls.

Can I get only the tools I need?

Yes. Pulse Gen is available as a full edition or as a tailored edition containing only the tools a project needs. Playback, DAQ setup, calibration curves, projects and GPS logging are included in every edition.

07

Analysis services

What should I send to get a project scoped?

The recording system, channel count, calibration information, approximate data volume, any GPS or CTD data and the output you need. A representative file is usually the fastest way to confirm the approach.

What do analysis projects deliver?

Typically a summary or technical report, CSV or workbook data, labelled figures and maps, selected acoustic clips and an organised project archive. A repeatable workflow can also be defined for applying the accepted method to additional files.

Question not answered here?

Send it with a representative file if you can, and we’ll reply directly.

Ask Blackfish Acoustics